UK EMC Regulations (UKCA)

UK EMC Regulations after BREXIT – SI 2016/1091 – A transposition of the EMCD

Using The UKCA Mark from January 2021

• UKCA Marking

Link to UK Designated Standards for EMC

• UK Designated Standards

NIST US-UK Mutual Recognition Agreement

• NIST Web Site

Overview

Three Modules;

• Module A – Internal Production Control (A.K.A. Self DoC)

• Module B – Type Examination

• Module C – Conformity to type based on internal production control

Manufacturer chooses which modules;

• Module A (Standard compliance route!)

• Module B+C (Voluntary use of NB)

Module A

Internal Production Control (DoC)

Manufacturer shall, on their sole responsibility. 1. Perform conformity assessment of the product type + testing by manufacturer or 3rd party 2. Testing in full to designated standards 3. Prepare all Technical Documentation 4. Monitor manufacturing process to ensure conformity + of the apparatus with the type assessed in step 1 5. Affix the CE marking to each individual apparatus + that is in conformity with the type assessed 6. Make a Declaration of Conformity (DoC) + and keep a copy of the DoC + together with the technical documentation + at the disposal of the national authorities + for 10 years after the apparatus has been placed on the market

Module B

EC-Type Examination and Certification

• Module B is not used alone but rather in conjunction with Module C.

• Module B utilizes the technical expertise of a Notified Body to examine the technical documentation and supporting evidence to assess the adequacy of the technical design of the apparatus. There is typically no examination of a specimen.

• The manufacturer or authorized representative chooses a SINGLE NOTIFIED BODY from EU or MRA Country such as the United States.

• Additionally, a declaration to the NB is made affirming that the same application has not been sent to another NB (NB will check)

The application

• shall include;

• Supporting evidence for the adequacy of the technical design solution and any documents that have been used, in particular when relevant designated standards have not been applied in full.

• Where applicable, the results of tests carried out by a lab (Test Report)

• Specifics of what part of the essential requirements are to be assessed (e.g. only immunity)

A Notified Body Shall

• Examine the technical documentation and supporting evidence

• Assess the adequacy of the technical design

• Produce an evaluation report recording activities

• Released in full or in part by applicant consent

Certificate / Letter

• If the report is negative, no certificate, issue “letter of refusal” instead

• Detailed response as to the refusal reason

• Require applicant to take corrective measures

• If the type meets the assessed requirements, issue EU-type examination certificate 3-31

Module C

• Ensure/declare that equipment concerned is in conformity with the type covered by the EU-type examination certificate received from NB.

• Prepare all Technical Documentation. (Before Module B process)

• Monitor manufacturing process to ensure conformity of the apparatus with the type covered by the certificate.

• Affix the CE marking to each individual apparatus that is in conformity with the type covered by the type certificate.

• Make a Declaration of Conformity and keep a copy of the DoC and a copy of the EU-type examination certificate, its annexes and additions together with the technical documentation at the disposal of the national authorities for 10 years after the apparatus has been placed on the market.

When To Use Module B+C

• Designated standards not used in full or do not exist.

• Unit meets EMC standards not recognized by EU, but meets essential requirements.

• Too many product variants and testing of all configurations may be impractical.

• The apparatus is too large to test as per requirements.